DAF CF ELECTRIC - Page 24

21
3
Securing the vehicle
WARNING! The electric vehicle is equipped with high-voltage
components and wiring. Not following these instructions can result in
severe personal injury or death.
After completing this procedure the high-voltage box, high-voltage
batteries and corresponding high-voltage cables are still connected to
the high voltage.
– Avoid the high-voltage components, identifiable by a warning
sticker.
– Avoid the high-voltage cables, identifiable by their orange colour.
– With the exception of maintenance and emergency repairs
described in this manual only a DAF certified mechanic may work
on the electric vehicle.
– To avoid getting in contact with residual voltage wait for ten
minutes before starting further work such as tilting the cabin.
WARNING! The high-voltage batteries will always carry high voltage
even after completing the 'High-voltage shutdown procedure'.
NOTE: The 'Shutting down high-voltage circuit' procedure is part of
workshop procedures. It is also described in the 'Emergency Response
Guide' used by the emergency services.
NOTE: For towing the vehicle see the corresponding chapter in the driver's
manual or the 'Emergency response guide'.
DW83211801.book Page 21 Wednesday, February 12, 2020 11:04 AM