4 Stabilising the vehicle
4.1 STABILISING THE VEHICLE
4.1.1 Air suspension chassis
Basic remote control
1 'ON/OFF' and 'STOP' key.
2 Automatic setting of normal
driving height.
3 Lifting of chassis while the key
is pressed.
4 Lowering of chassis while the
key is pressed.
NOTE:
The remote control is (de-) activated by a long press on the 'STOP' key.
After the ignition is switched off, the remote control is always deacti-
vated.
The stop function is always active regardless of the remote control
being activated or not.
Extended remote control
1 Front axle of truck selected.
2 Rear axle of truck selected.
3 Truck trailing axle selected.
4 LED's indicating that the cor-
responding function is acti-
vated.
5 Front axle of trailer selected
6 Rear axle of trailer selected.
7 Trailer trailing axle selected.
8 'STOP' key.
9, 10,
12
and
13
Lifting the chassis to a pre-set
height.
11 Automatic setting of normal
driving height.
D005113-2
5
6
7
8
4
9
1012
11
13
14
3
2
1
4
Stabilising the vehicle
22
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
To Next Page
Loading...
Need help?
General
