Chapter 1
General Information
6 Owner’s Manual of BECS- A15 Computerized Control System
19. Thread-trimming
Thread-trimming can be manually operated. The machine can trim the thread
automatically at the end of embroidery process or at color-changing.
20. Thread-breakage Detection
In case of thread breakage or running-out of bobbin thread, the machine will stop and give
warning by indicator.
21. Color-changing
At the color-changing point, user can either perform the color-changing manually or let
the system do it automatically according to the preset order.
1.3
Technical Specifications
1. Maximum number of patterns saved in memory: 800
2. Memory capacity: 100 million stitches
3. Screen resolution ratio: 1280*800
4. Network port speed: 100Mbps
5. Supported method for data exchange: USB disk, network (temporarily unavailable)
6. Control precision: Minimum controllable stitch interval is 0.1mm
7. Stitch range: 0.1mm~12.7mm
To Next Page
Loading...
Need help?
General
