DAHAO BECS-A15 User Manual

Chapter 1
General Information
Owner’s Manual of BECS- A15 Computerized Control System 1
Chapter 1 General Information
Thank you for using Dahao Computerized Control System for Embroidery Machine.
Please read this manual carefully so as to operate the machine correctly and effectively.
Besides that, you should keep this manual properly for future use.
1.1 Warnings and Cautions
In order to avoid fire, electrical shock or unpredicted injuries, you should follow the listed
safety rules.
Matters for Attention on Usage
Danger
During the operation, do not try to open the machine box. The high voltage
contained in some parts is deadly. The rotating parts may cause serious injury.
Forbidden
Don't expose the machine to humidity gas, poisonous gas, water, and dust.
Forbidden
Don’t store or operate the machine in the vibration area, which may cause trouble
to the machine.
Attention
Please abide all the warnings and safety requirements to ensure the security.
Attention
LCD screen is fragile. Do not use the hard or sharp item to click the screen.
Attention
Please insert U disk correctly and don’t force it in, otherwise, USB interface or U
disk may get damaged
Attention
We will add appendix if necessary. If there is any difference between the manual
and appendix, the content in the appendix shall take precedence.
Matters for Attention on Transportation and Loading
Attention
When moving the machine, please not to hold the cable.
Attention
Please abide all the warnings and safety requirements to ensure the security.
Compulsory
Requirements
Overloading may cause serious loss. Please load according to the instruction on
the box

DAHAO BECS-A15 Specifications

General

Brand	DAHAO
Model	BECS-A15
Category	Controller
Language	English