Possible malfunctions
en
3.
1. If there are too many sheets of paper, the shredding process is stopped.
2. The shredding mechanism automatically runs in reverse for a short time and the paper is ejected.
3. ATTENTION! To avoid damaging the shredding mechanism, do not operate the Forward and
Reverse switches alternately!
4. If paper continues to be jammed, operate the Reverse button briefly.
5. Reduce the number of sheets of paper by removing or tearing off.
6. The shredding process starts automatically after the paper is inserted again, otherwise operate the
Forward button.
40334, 40434, 40534, 41334, 41434, 41534
1. In the event of a paper jam, the shredding mechanism runs in reverse for 0.5 seconds.
2. Remove the paper. Then operate the Forward switch to dear the shredding mechanism. The Reverse
switch is inhibited until the Forward switch has been actuated.
3. Reduce the number of sheets of paper.
Depending on the model variant, your document shredder may not have all the possible components and functions.
To Next Page
Loading...
Need help?
General
