Dahle Vantage 12E User Manual

Users Manual
Vantage Trimmer Models 12E, 15E, 18E
• For use in trimming paper, photographs, and thin cardboard, etc.
• 12” (12E), 15” (15E), 18” (18E) trimming lengths
• Automatic clamping system provides comfortable and safe trimming
• Scale in cm and inches with a ½” grid for easy sizing of material
Safety Instructions
• To avoid injuries, use the trimmer on a solid, level, and secure surface.
• Always secure the blade after use.
• Keep young children away from the trimmer.
• Do not touch the cutting blade with your fingers.
Usage
• The upper blade is fixed into place during non-operation. To release the upper blade gently push to the right approximately ½” and lift up.
• Place the mat�
backstop to the correct position.
• Press the blade down slowly. The clamp will then automatically hold the material to be cut in place.
• After the cutti�
to the right ½”, dropping the blade down slightly and then pushing the handle slightly back to the left.
If you have any questions, please call a Customer Service Representative at (800) 658-8788.
abcoffice
www.abcoffice.com (800) 658-8788

Dahle Vantage 12E Specifications

General

Material	Metal
Product type	Manual
Feet material	Rubber
Product color	Black, White
Cutting length	304.8 mm
Cutting capacity	15 sheets
Adjustable backstop	Yes
Suitable for materials	-
Number of measuring scales	1

Weight and Dimensions

Depth	260.35 mm
Width	501.65 mm
Height	63.5 mm

Summary

Safety Instructions for Vantage Trimmer

Safe Operating Environment

Ensure the trimmer is used on a solid, level, and secure surface to avoid injuries.

Blade Security and Child Safety

Always secure the blade after use and keep young children away from the trimmer.

Vantage Trimmer Usage Guide

Blade Release and Mat Placement

Release the upper blade by pushing it right approximately 1½" and lift up; place the mat.

Material Clamping and Cutting

Press the blade down slowly to clamp material; after cutting, push the handle back to the left.