To Next PageTo Next Page
Need help?Do you have a question about the Dahle 558 and is the answer not in the manual?
General| Product color | Blue, Grey |
|---|---|
| Cutting length | 1298.5 mm |
| Cutting capacity | 12 sheets |
Lists models and order numbers for the base frame accessory.
Lists models and order numbers for the roll holder accessory.
Do not touch cutting edges of the round knife and lower knife due to injury risk.
Machines meet safety regulations if no technical modifications are made.
Use only genuine DAHLE spare parts for safety and indicate model number.
Details standard equipment like round knife, guide bar, measuring scale, wall mounting facility, and rockers for unwinding rod.
Material is fixed by pressing bar and rubber roller during cutting.
Exceeding cutting height or using unsuitable material can damage the round knife.
Steps for cutting, including positioning material, pressing bar, and pulling knife head.
Instructions for using the unwinding rod for cutting material on rolls and wall mounting.
Clean the guide rod occasionally with a moist, lintfree cloth.
Steps to remove the knife head, including unscrewing side sections.
Steps for installing a replacement knife head, ensuring correct positioning relative to the lower knife.
Warning about the sharpness of the round knife and not reaching under the knife head.
