User’s Manual
106
Snapshot
Configure the settings for the snapshot parameters.
Table 5-21 Snapshot parameters
Manual Snapshot
In the
list, select how many snapshots you want to take
each time.
Channel
In the
list, select the channel that you want to configure the settings
for.
Type
In the
list, you can select
,
, or
as the
event type for which you want to take a snapshot.
: The snapshot is taken during the scheduled period.
: The snapshot is taken when there is an alarm event occurs, such
as motion detection event, video loss, and local alarms.
: The snapshot is taken when the face is detected. The
face detection function is support only with the Channel 1.
Size
In the
list, select a value for the image. The bigger the value is, the better
the image will become.
Quality
Configures the image quality by 6 levels. The higher the level, the better the
image will become.
Interval
Configures or customizes the snapshot frequency. You can select 1 second
per one snapshot to 7 seconds per one snapshot. The maximum is 3600
seconds per one snapshot.
Click Apply to complete the settings.
Click Copy to to copy the settings to other channels.
To Next Page
Loading...
Need help?
General
