Dahua Technology DH-XVR42 AN-I Series User Manual

User’s Manual
59
Device manager
2) Tap
on the upper-right corner.
The page requiring device initialization is displayed. A pop-up message reminding you
to make sure the Device is initialized is displayed.
3) Tap
OK.
 If the Device has not been initialized, Tap
Device Initialization to perform initializing
by following the onscreen instructions.
 If the Device has been initialized, you can start adding it directly.
4) Tap
Add Device.
You can add wireless device or wired device. The Manual takes adding wired device as an
example.

Dahua Technology DH-XVR42 AN-I Series Specifications

General

Brand	Dahua Technology
Model	DH-XVR42 AN-I Series
Category	DVR
Language	English