Dahua ASA1222E - Features

1. Select “Date Format”, click .
2. Click or to switch date format.
3. Click to confirm.
 Set device displayed date.
1. Select setup date, click .
2. Click or to select set position, click .
3. Click number key to set period or click or to adjust time, click
to confirm. Select next position to set.
4. Click . System asks if you want to save.
5. Click to save.
 Set device display time.
1. Select “Time Setup”, click .
2. Click or to select set position, click .
3. Click number key to set period or click or to adjust time, click
to confirm. Select next position to set.
4. Click . System asks if you want to save.
5. Click to save.
3.5.2 Features
Features setup includes state switch time, bell time, recheck interval, verification method
and system self check.
3.5.2.1 Set State Switch Time
You can set attendance status and corresponding time according to actual condition. In
standby interface, below it shows time in format set by you. This is mainly used for side of
platform.