Step 1. Select Feature>Function>State Switch Time, click . See Figure 3-21.
Figure 3-21
Step 2. Click or to select setup position, click to edit.
Step 3. Click number key to set period or click or to adjust time, click
to confirm.
Step 4. Click or to switch status, click to confirm status.
Step 5. Click , select next period to set.
Step 6. Click again. System asks if you want to save.
Step 7. Click to save.
3.5.2.2 Bell Time
You can set bell as scheduled alarm.
Step 1. Select Feature>Features>Bell Time, click . See Figure 3-22.
To Next Page
Loading...
