Figure 3-22
Step 2. Click or to select bell you want to set, click to select row.
Step 3. Click or to select detail config item, such as bell time, bell time and
bell delay, click to edit corresponding item.
Bell scheduled time, when this time is reached, it auto bells.
Set ting cycle period, click or to switch, you can select
either every day or every week to set bell auto ON time.
Duration of each time of bell, it will turn off over the set period.
Chart 3-3
Step 4. Click to exit and save.
3.5.2.3 Recheck Interval
In set period, only first time attendance record will be valid, other attendance after the first
time will be invalid.
Step 1. Select Feature>Features>Recheck Interval, click .
Step 2. Click number key to set period or click or to adjust time, unit is
minute.
Step 3. Click to confirm.
To Next Page
Loading...
