5 Menu
5.1 HCVR Settings
5.1.1 Control Coaxial Device
This HDCVI camera series can adjust OSD menu via coaxial control. After connected the
camera to the HDCVI series HCVR, from Main Menu->Setting->System->PTZ, you need to
select the channel number for access and set control mode as HDCVI and the protocol as HD-
CVI. Click “Save” button to save current setup. See Figure 5-1.
Figure 5-1
5.2 Menu Operation
Click the right mouse button and select “PTZ Control”, then you will see the “PTZ Setup” menu,
which is as shown in Figure 5-2 and Figure 5-3.
Figure 5-2
To Next Page
Loading...
