4
Figure 2-3 Side panel (with PoE)
Table 2-2 Port description (with PoE)
No. Description
1
PD Alive: When a terminal device crash is detected, the device will power
down and restart the terminal device.
2
Extend Mode: Extends the maximum transmission distance to 250 m, but
reduces average transmission speed to 10 Mbps.
In Extend Mode, the transmission distance of the PoE port is up to 250 m
but the transmission rate drops to 10 Mbps. The actual transmission
distance might vary due to power consumption of connected devices or the
cable type and status.
3 Power port (dual power backup): Supports 48–57 VDC.
4 GND terminal.
Figure 2-4 Side panel (without PoE)
Table 2-3 Port description (without PoE)
No. Description
1 Power port (dual power backup): Supports 12 VDC.
2 GND terminal.
To Next Page
Loading...
