1
1 Overview
1.1 Introduction
The device is a hardened switch. It provides a high-performance switching engine and large buffer
memory to ensure smooth video stream transmission. With its full-metal and fanless design, the
device has great heat dissipation capabilities on its shell surface, and is able to work in environments
that range from–30 °C (-22 °F) to +65 °C (+149 °F). With its DIP design, it provides a variety of work
modes that suit different scenarios, including corridors and offices.
1.2 Features
●
4/8 × 10 Mbps/100 Mbps or 10 Mbps/100 Mbps/1000 Mbps Ethernet ports.
●
Uplink ports include Ethernet ports and optical ports.
●
All ports meet the requirements of IEEE802.3af and IEEE802.3at standards. The red ports also
conform to Hi-PoE and IEEE802.3bt standards, and the orange ports conform to Hi-PoE standard.
●
250 m long-distance PoE transmission, which can be enabled by the DIP switch.
In Extend Mode, the transmission distance of the PoE port is up to 250 m but the transmission
rate drops to 10 Mbps. The actual transmission distance might vary due to power consumption of
connected devices or the cable type and status.
●
PoE watchdog for real-time detection of terminal device status.
●
Fanless.
●
Desktop mount and DIN-rail mount.
To Next Page
Loading...
