User’s Manual
Installation 9
3 Installation
Installing the Device
The device supports standard rack-mount.
Install the rackmount kit on both sides of the switch.
Rack-mount
Wiring
3.2.1 Ethernet Port
Ethernet port pin No.
10/100/1000 Base-T Ethernet port adopts standard RJ-45 port. Equipped with self-adaptation function,
it can be automatically configured to full duplex/half-duplex operation mode, and supports MDI/MDI-
X self-recognition function of the cable, which means it can use cross-over cable or straight-through
cable to connect terminal device to network device.
Pin description
The cable connection of RJ-45 connector conforms to the standard 568B (1-orange white, 2-orange, 3-
green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown).
To Next Page
Loading...
