User’s Manual
Product Overview 8
Table 2-2 Front panel description
No. Name Description
1 RJ-45 port Ethernet port, support 10/100/1000 Mbps self-adaptive.
2 SFP port Fiber port supports 1000 Mbps.
3 Reset button Long press the button for 5 s to reset the device and recover
default configuration.
4 Console serial port Device debugging port.
5 PoE power usage
indicator
Current power consumption display.
6 Downlink indicator Current port link status and PoE status.
7 SFP port indicator SFP port indicate link/act.
8 System indicator System status:
When device is booting up, the light is flashing quickly.
When device is working properly, the light is flashing slowly.
9 Power indicator Device current power status.
Rear Panel
Rear panel
Table 2-3 Rear panel description
No. Name Description
1 Power switch Control device power on and off.
2 Power socket Support 100 VAC to 240 VAC.
3 Ground terminal GND
To Next Page
Loading...
