Ceiling Mounting 6
Pull the cables through the hole, and place the speed dome pedestal closely to the Step 3
mounting plate.
Rotate the speed dome pedestal to the arrow shown on the speed dome edge, and
Step 4
then hang the speed dome on the mounting plate. See Figure 3-5.
Rotating the speed dome pedestal Figure 3-5
Insert the screws into the holes on the side of mounting plate to secure the speed dome Step 5
on the mounting plate. See Figure 3-6.
And speed dome is installed. See Figure 3-7.
Securing the speed dome on the mounting plate Figure 3-6
Speed dome installed Figure 3-7
To Next Page
Loading...
