This function is supported only when the SIM TYPE is set to CONTRACT in
the COMMUNICATIOR menu.
Set the expiration date of the SIM card installed in the GSM telephone
communicator.
It is suggested to set a minimum period of 10 days before the real
expiration of the SIM card so as to have adequate warning time to
recharge it and extend its validity.
At the set date, the failure status LED indicator will light up. If
programmed, SMS can be sent to external telephone number. Auxiliary
outputs can also be activated for connection to local devices.
Press to return to the DATE/TIME menu. Step 4
Then you can press and to move to the next menu or press to exit from the
Installer Menu.
HOLIDAY 1.33
The HOLIDAYS menu is used to set the holidays for the year when the Timers will not have any effect on
arming and disarming, or need to completely block user code working and outputs.
You can program up to 20 holiday periods.
After entering the Installer Menu, press and to scroll up and down until you reach the Step 1
HOLIDAY menu. See Figure 1-30.
Holiday Figure 1-30
Press to enter the programming mode. Step 2
Press and to select the holiday that you want to configure, and then press . Step 3
The holiday time setting interface is shown. See Figure 1-31
By pressing + 2, you can enter the EDITING mode for changing the description of holiday.
Holiday time Figure 1-31
1: Holiday start day
2: Holiday start month
3: Holiday end day
To Next Page
Loading...
