Dahua DHI-ARC3008C - Access Codes

Alarm Control Panel Installer Manual
61
Submenu
Setting
SMS TIME
Type in the specific time when user wants to receive SMS text for SYSTEM
status and/or CREDIT SIM.
AREA
Press 1 to 8 to select the alarm event from which Area can be sent to this
SMS number.
EVENT
Press 1 to 5 to select which event can be sent to this SMS number.
1: S-system event

2: M-module

3: E-Emergency

4: I-Arm/Disarm

5: Z-Zones

4) Press to return to the SMS number selection menu.
Then you can continue with programming other SMS number, or press to return to the
SMS NUM menu from where you can press and to move to the next menu.
 SIM NUM
Record the SIM card number that is installed in the control panel.
Press , the Keypad requests "EXIT FROM MENU?". Then press to confirm and exit Step 3
from the TEL NUMBER menu.
REMOTE SERVICE 1.35
After entering the Installer Menu, press and to scroll up and down until you reach the Step 1
REMOTE SERVICE menu. See Figure 1-33.
Remote service Figure 1-33
Press to enter the programming mode. Step 2
In the State submenu, select YES or NO. Step 3
 YES: Allows remote control from telephone call, SMS, or Platform.
 NO: Do not allow the remote control.
Controlling through App is not affected by this setting.
Press to return to the REMOTE SERVICE menu. Step 4
Then you can press and to move to the next menu or press to exit from the
Installer Menu.