Dahua DHI-ASC1204B - Authorize Access by Door Group

Smart PSS Config 22
Step 3 Enter “Name”; select “Time Zone” and doors to be managed.
Step 4 Click “OK” to complete adding.
3.5 Authorize
Grant users authorities according to door group and user.
3.5.1 Authorize According to Door Group
Select a door group, add corresponding users to the group, so all users in the group obtain
authority of all doors in the group.
Step 1 In “Access” interface, click
, and then click “Access Level”, as shown in Figure
3-15.
Figure 3-15
Step 2 Click .
The system pops up “User Select” dialog box.
Step 3 Select the user’s department from dropdown list, or enter the user’s ID or name directly,
as shown in Figure 3-16.