User’s Manual
64
Format the SD card before use.
Step 1 Select Setup > Storage > Destination > Local.
Select Overwrite or Stop from Disk Full, meaning overwrite the records or stop
storing new pictures or videos respectively when disk is full.
View the storage information of the card.
Click Hot Swap, and then you can pull out the SD card.
Click Format, and then you can format the SD card.
Figure 4-74 Local
Step 2 Click Confirm.
4.5.5.3 FTP
FTP function can be enabled only when it is selected as destination path. When the network
does not work, you can save all the files to the internal SD card for emergency.
You can set picture name and storage path. Click Help… to view naming rule.
Step 1 Select Setup > Storage > Destination > FTP.
To Next Page
Loading...
Need help?
General
