Need help?Do you have a question about the Dahua DHI-ITC237-PW6M-LZF1050 and is the answer not in the manual?
General| Brand | Dahua |
|---|---|
| Model | DHI-ITC237-PW6M-LZF1050 |
| Category | Security Camera |
| Language | English |
Details electrical safety codes and power supply requirements for the camera.
Outlines environmental conditions for safe operation and installation of the camera.
Provides guidance on handling, maintenance, and avoiding damage during camera operation.
Explains how to access and log in to the camera's web interface.
Guides on initial setup, password setting, and IP configuration for the camera.
Describes the process of logging into the web interface after initialization.
Provides steps to reset the camera's password using the web interface.
Allows configuration of intelligent parameters for the camera.
Covers setting snapshot rules and detection parameters.
Allows setting vehicle recognition parameters and modes.
Guides on configuring recognition parameters for vehicles.
Manages block and allow lists for vehicle access control.
Configures barrier control modes and opening/closing information.
Allows adjustment of image, video, and stream parameters.
Allows adjustment of image, video, and stream parameters.
Guides on configuring image brightness, contrast, hue, and saturation.
Allows setting camera stream information, including resolution and frame rate.
Allows configuration of IP address, port, and other network parameters.
Guides on configuring IP address, subnet mask, and gateway.
Sets connection port information for device access.
Details configuration of various communication ports.
Provides guidance on configuring alarm and abnormality settings.
Guides on configuring alarm types and operations.
Sets parameters for relay activation, including period and signal duration.
Provides guidance on setting relay-out mode for different events.
Provides guidance on setting storage and record control information.
Allows configuration of general information, user accounts, and system settings.
Manages user accounts, groups, and permissions for web access.
Guides on adding, deleting, and modifying user accounts.
Configures system services for security.
Guides on creating and installing certificates for secure HTTPS access.
Sets security rules to protect the camera system.
Guides on upgrading the camera system firmware.
Mandatory steps for basic equipment network security.
Suggestions for creating strong and secure passwords.
Recommends keeping firmware and client software up-to-date.
Suggests changing default ports and enabling secure protocols.
Guides on creating and installing certificates for secure HTTPS access.
Provides recommendations for network logging and safe environment.
To Next Page