12
You can select more than one check box and add cameras in batches.
Figure 1-14 Add IP camera by search result
Result
● If the status of the added camera is green ( ), it indicates the camera is properly added to
the NVR.
● If the status of the added camera is red ( ), it indicates connection failure between the
camera and the NVR. Check the parameters of the camera such as password, protocol
and channel number, and then try adding it again.
1.4.3 Manually Adding IP Camera
You can add an IP camera by IP information at one time.
Prerequisites
Make sure that the cameras you want to add have already been initialized and connected to
the right network.
Procedure
Step 1 Select
Main Menu
>
CAMERA
>
Camera List
>
Add Camera
.
Step 2 Click
Manual Add
.
To Next Page
Loading...
