3
Figure 1-3 Configure password information
Table 1-1 Password information
By default, the user is
admin
and you cannot change it.
Enter a new password for device administrator in
Password
field, and confirm the password in the next field.
The new password can be set from 8 characters to 32
characters and contains at least two types from numbers, letters
and special characters (excluding"'", """, ";", ":" and "&").
Enter a prompt question that will help you recall the password for
your device.
On the login interface, click and the prompt will be displayed
to help you reset the password.
Step 7 (Optional) Use mouse to draw an unlock pattern, and then draw it again for
confirmation.
To Next Page
Loading...
