Dahua HFW2431S-S-S2 User Manual

Network Configuration 4
same as what you set during initialization, otherwise there will be "wrong password"
notice.
Select the devices whose IP addresses need to be modified, and then click Modify IP.
Step 2
The Modify IP Address interface is displayed. See Figure 2-3.
Modify IP address interface Figure 2-3
Select Static mode and enter start IP, subnet mask and gateway. Step 3
 IP addresses of multiple devices will be set to the same if you select Same IP.
 If DHCP server is available in the network, devices will automatically obtain IP
addresses from DHCP server when you select DHCP.
Click OK. Step 4
2.3 Logging in Web Interface
Open IE browser, enter the IP address of the device in the address bar and press Step 1
Enter.
If the setup wizard is displayed, follow the instructions to finish the settings.
Enter user name and password in the login box, and then click Login. Step 2
For first time login, click Click Here to Download Plugin and install the plugin as Step 3
instructed.
The main interface is displayed when the installation is finished. See Figure 2-4.

Dahua HFW2431S-S-S2 Specifications

General

Brand	Dahua
Model	HFW2431S-S-S2
Category	Security Camera
Language	English