User's Manual
91
Figure 4-1
Step 2 Set system time zone according to the actual environment. Refer to Table 4-4 for
detailed information.
Click to shut down the device. It is suitable for the system integrator or the user to
shut down directly after setting the time zone.
Step 3 Click
Next
.
The
Device Initialization
interface is displayed. See Figure 4-2.
Figure 4-2
Step 4 Set login password of
admin
. See Table 4-1.
Table 4-1
By default, the user is admin.
In the Password box, enter the password for admin.
The new password can be set from 8 characters through 32
characters and contains at least two types from number, letter
and special characters (excluding"'", """, ";", ":" and "&").
To Next Page
Loading...
Need help?
General
