Page9
Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: 1 VTO+m VTH
VTO Web Config
Main VTH Setup
Note: If there are more than 2 VTHs, you can set group call function of VDP. Maximum support for 5 VTH.
①
Login VTO2000A web interface http://192.168.1.110 ,
System Config -> LAN Config, make sure to tick the
‘Group Call’, and click OK to save.
②
System Config -> Indoor Manager, click on ‘Add’. You
need to input room number of VTH in the ‘VTH Short
No’, such as 101. Refer to page 8.
③
Reboot the device.
Extension VTH Setup
1
To Next Page
Loading...
