Need help?Do you have a question about the Dahua VTH1660CH and is the answer not in the manual?
General| Touchscreen | Yes |
|---|---|
| System | Embedded LINUX |
| Information Release | Yes |
| Leave Messages While Away | Yes |
| SOS Alarm | Yes |
| Network Port | 1 |
| Display | 7-inch |
| Resolution | 1024x600 |
| Connectivity | Wired |
| Audio | Built-in speaker and microphone |
| Camera Support | Yes |
| Protocol | TCP/IP |
| Compression Standard | H.264 |
| Audio Compression Standard | G.711 |
| Audio Input | Built-in microphone |
| Audio Output | Built-in speaker |
| Audio Mode | Support duplex communication |
| Audio Gain | Yes |
| DND Mode | Yes |
| Alarm Output | 1 |
| Ethernet | 10/100Mbps |
| Network Protocol | TCP/IP |
| RS-485 | Yes |
| Power Supply | DC 12V |
| Installation | Wall-mounted |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% |
| Power Consumption | ≤12W |
Lists essential cybersecurity actions like changing passwords and updating firmware.
Suggests optional but beneficial security measures for network enhancement.
Details on port forwarding, including not forwarding unnecessary ports.
Defines signal words used for safety warnings in the manual.
Specifies environmental and placement conditions for device operation.
Details on using appropriate power supplies and wiring for the device.
Lists the various functions of the VTH series product.
Describes the front panel components of VTH5221/VTH5241 series.
Explains the rear panel ports for VTH5221/VTH5241 series.
Details rear panel ports of VTH5221/VTH5241 series with diagrams.
Illustrates the network diagram for a 2-wire system setup.
Explains two types of digital system networks: PoE and independent power.
Provides a step-by-step flowchart for VTH installation.
Lists important requirements and environmental conditions for VTH installation.
Suggests optimal installation height for the device's central point.
Covers initial setup and configuration for device debugging.
Details the process of initializing and configuring VTO settings.
Guides through the initial setup, password, and email configuration for VTO.
Explains how to modify VTO IP address and configure network settings.
Instructs on changing the system type from analogue to TCP/IP for VTH connectivity.
Guides on selecting the server type that manages VTO devices.
Details how to configure SIP server information for VTO.
Covers initialization and network configuration for VTH.
Explains how to configure VTH network information for LAN and WLAN.
Steps to verify debugging by checking VTO calling VTH and VTH monitoring VTO.
Introduces the various setting categories available on the VTH.
Covers VTH time, display, password, and other general settings.
Introduces managing contacts, calling users, and viewing call logs.
Introduces the ability to monitor VTO, fence station, or IPC.
Introduces the system's arming and disarming capabilities.
Guides on downloading and installing the DSS mobile application.
Covers running the app, accepting terms, and the registration interface.
Explains how to log in to the DSS mobile app and view call records.
To Next Page
