Dahua VTH1660CH - 5.1.1.2 VTO Network Configuration

Device Debugging 24
Figure 5-3
Click “OK”.
The system displays WEB login interface, as shown in Figure 5-4.
Figure 5-4
Enter user name and password, and click “Login”.
Log in the WEB interface of the device.
 Default user name is admin.
 Password is the one set during initialization.
5.1.1.2 Network Config
Modify IP address of VTO to be planned IP address.
Select “Network Setting > Basic”.
The system displays “TCP/IP” interface, as shown in Figure 5-5.