Step 3. In homepage, click , you can view added IPC video window.
Clean
Click Clean, the screen will be locked for 10s and you can clean the screen during this time
period.
Default
Click Default to restore default settings.
Touch Ring
Slide , ON means touch ring is enabled and OFF means touch ring is disabled.
3.1.1.2 Project
This function is for professionals only, and the entrance password is 002236 by default.
Product Info
You can go to Project Settings>Product Info interface, to configure master VTH and
extension.
VTO “room no.” must match VTH short no. in VTH’s WEB interface.
Figure 3- 8
Net Set
You can go to Project Settings>Net Set interface, set master VTH’s IP, subnet mask,
gateway and MAC address.
To Next Page
Loading...
Need help?
General
