Need help?Do you have a question about the Daikin 3MXS40K2V1B and is the answer not in the manual?
General| Model | 3MXS40K2V1B |
|---|---|
| Category | Air Conditioner |
| Cooling Capacity | 4.0 kW |
| Outdoor Unit Weight | 34 kg |
| Power Supply | 220-240V / 50Hz / 1Ph |
| Refrigerant | R32 |
Details functions for cooling-only operation, covering outdoor and indoor units.
Details functions for heat pump operation, covering outdoor and indoor units.
Provides specifications for outdoor and indoor units in cooling-only mode.
Provides specifications for outdoor and indoor units in heat pump mode.
Details connector wiring for outdoor unit main and service monitor PCBs.
Details connector wiring for various indoor unit PCBs like control, signal receiver, and sensor.
Details connector wiring for wired remote controllers like BRC1D528 and BRC1E52A7/B7.
Explains control functions for RA indoor units, including temperature, airflow, and special operations.
Explains control functions for SA indoor units, focusing on drain pump, thermistor, and freeze prevention.
Describes the function of various thermistors used for temperature detection and control.
Details control specifications including mode hierarchy, frequency control, and malfunction detection.
Provides guidance on handling and operating the air conditioner after installation.
Details manual contents and reference pages for RA indoor units.
Details manual contents for SA indoor units, including remote controller information.
Provides guidance on troubleshooting indoor and outdoor units using LED indicators.
Lists common problems and their corresponding measures for diagnosis.
Details service check procedures for remote controllers and system checks.
Lists error codes displayed on the remote controller and their descriptions.
Details removal procedures for outdoor units of 40-75 class, including panels, PCBs, and components.
Details removal procedures for outdoor units of 80/90 class, including panels, PCBs, and components.
Explains the procedure for pump down operation for relocating or disposing the unit.
Describes forced cooling and heating operations and their conditions.
Details the wiring error check function for automatic correction of wiring errors.
Provides instructions for carrying out trial operation for indoor units and checking functions.
Explains field settings, including priority room settings and mode lock configurations.
Illustrates piping diagrams for various outdoor and indoor unit models.
Provides wiring diagrams for outdoor and indoor units, detailing component connections.
To Next Page
