Daikin Altherma 3 H F+W - Main Menu Screen; Setpoint Screen

4 Operation
Operation manual
6
EABH/X16DF6V(7)+9W(7) + EAVH/
X16S(U)18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F+W
4P644480-1A – 2021.09
Item Description
Indoor unit /
domestic
hot water
tank
b1
b2
b1 Indoor unit:
▪
: Floor-standing indoor unit with integrated
tank
▪
: Wall-mounted indoor unit with separated
tank
▪
: Wall-mounted indoor unit
b2 Water pressure
Space
operation
mode
c
▪ : Cooling
▪
: Heating
Disinfection
/ Powerful
d
▪ : Disinfection mode active
▪
: Powerful operation active
Date / time e Current date and time
Holiday f
: Holiday mode active
Main zone
g3
g1
g4
g2
g1 Heat emitter type:
▪ : Underfloor heating
▪
: Fancoil unit
▪
: Radiator
g2 Leaving water temperature setpoint
g3 Room thermostat type:
▪
: Daikin user interface used as room
thermostat
▪ : External control
▪ Hidden: Leaving water temperature control
g4 Measured room temperature
Additional
zone
h3
h1
h2
h1 Heat emitter type:
▪
: Underfloor heating
▪
: Fancoil unit
▪
: Radiator
h2 Leaving water temperature setpoint
h3 Room thermostat type:
▪ : External control
▪ Hidden: Leaving water temperature control
Domestic
hot water
i1
i2
i1
: Domestic hot water
i2 Measured tank temperature
Malfunction j
or : A malfunction occurred
See "7.1To display the help text in case of a
malfunction"[415] for more information.
4.2.2 Main menu screen
Starting from the home screen, press (
) or turn ( ) the
left dial to open the main menu screen. From the main menu, you
can access the different setpoint screens and submenus.
a
2
Main zone
Additional zone
Room
Malfunctioning
Space heating/cooling
a Selected submenu
Possible actions on this screen
Go through the list.
Enter the submenu.
Enable/disable breadcrumbs.
Submenu Description
[0]
or
Malfunctioning
Restriction: Only displayed if a
malfunction occurs.
See "7.1To display the help text in
case of a malfunction"[415] for more
information.
[1]
Room
Restriction: Only displayed if a room
thermostat is connected to the indoor
unit.
Set the room temperature.
[2]
Main zone
Shows the applicable symbol for your
main zone emitter type.
Set the leaving water temperature for
the main zone.
[3]
Additional zone
Restriction: Only displayed if there
are two leaving water temperature
zones. Shows the applicable symbol
for your additional zone emitter type.
Set the leaving water temperature for
the additional zone (if present).
[4]
Space heating/
cooling
Shows the applicable symbol for your
unit.
Put the unit in heating mode or cooling
mode. You cannot change the mode
on heating only models.
[5]
Tank
Restriction: Only displayed if a
domestic hot water tank is present.
Set the domestic hot water tank
temperature.
[7]
User settings
Gives access to user settings such as
holiday mode and quiet mode.
[8]
Information
Displays data and information about
the indoor unit.
[9]
Installer
settings
Restriction: Only for the installer.
Gives access to advanced settings.
[A]
Commissioning
Restriction: Only for the installer.
Perform tests and maintenance.
[B]
User profile
Change the active user profile.
[C]
Operation
Turn heating/cooling functionality and
domestic hot water preparation on or
off.
4.2.3 Setpoint screen
The setpoint screen is displayed for screens describing system
components that need a setpoint value.