Daikin Altherma 3 H HT F User Manual (English)

Other manuals for Daikin Altherma 3 H HT F

Installation Manual44 pages

Installer's Reference Guide300 pages

Questions and Answers:

G
Gina FlynnAug 17, 2025
Why is my Daikin Heat Pump not heating or cooling as expected?
- D
  David WaltersAug 17, 2025
  The Daikin Heat Pump might not be heating or cooling correctly due to an incorrect temperature setting. Check the temperature setting on the remote controller. Also, low water flow could be a factor. Ensure all shut-off valves are completely open, the water filters are clean, there's no air in the system, the water pressure is above 1 bar, the expansion vessel isn't broken, and the valve towards the expansion vessel is open. The water volume in the installation may also be too low; ensure it's above the minimum required value.
D
Denise WilsonAug 20, 2025
How to display error codes on Daikin Altherma 3 H HT F?
- J
  juanlittleAug 20, 2025
  To display help text for a malfunction on your Daikin Heat Pump, press the left dial to access the main menu and navigate to 'Malfunctioning'. This will show a brief error description and code on the screen. For a more detailed explanation, press the screen displaying the error.
B
Brian CrosbyAug 22, 2025
What to do if my Daikin Altherma 3 H HT F compressor does not start (space heating or domestic water heating)?
- J
  Jeffrey WilsonAug 22, 2025
  If the compressor on your Daikin Heat Pump isn't starting, it could be due to low water temperature. If the backup heater doesn't start either, check that its power supply is correctly wired, the thermal protector isn't activated, and the contactors aren't broken. Additionally, ensure the preferential kWh rate power supply settings and electrical connections match. If the preferential kWh rate signal was sent by the electricity company, check the user interface to see if the forced off contact is on and wait for the power to return.
P
Pamela PhillipsAug 26, 2025
What to do if my Daikin Altherma 3 H HT F Heat Pump system is making gurgling noises after commissioning?
- E
  ecarrAug 26, 2025
  Gurgling noises in your Daikin Heat Pump system after commissioning typically indicate air in the system. Purge the air from the system. The noise can also be caused by various malfunctions. Check the user interface for error messages.
J
James ZimmermanAug 27, 2025
Why is the pressure relief valve opening on my Daikin Altherma 3 H HT F?
- P
  Peggy WilliamsAug 28, 2025
  The pressure relief valve on your Daikin Heat Pump may be opening because the expansion vessel is broken, in which case you should replace it. Another cause could be that the valve of the water circuit towards the expansion vessel is closed; open the valve. Also, the water volume in the installation might be too high; ensure it is below the maximum allowed value. Finally, the water circuit head may be too high; check the installation requirements.
C
Christine RodriguezAug 31, 2025
How to fix a Daikin Altherma 3 H HT F Heat Pump when the space is NOT sufficiently heated at low outdoor temperatures?
- A
  aguilarjosephAug 31, 2025
  If your Daikin Heat Pump isn't sufficiently heating the space at low outdoor temperatures, check if the backup heater operation is activated. Ensure the backup heater operation mode is enabled, the overcurrent circuit breaker is on, and the thermal protector is not activated; if it has, check the water pressure, whether there is air in the system and the air purge operation, then press the reset button in the switch box. Also, verify that the backup heater equilibrium temperature is configured correctly and that the space heating priority settings have been configured appropriately. Purge air manually or automatically if there is air in the system.
A
Amber WyattSep 2, 2025
What to do if the Daikin Heat Pump pump is blocked?
- M
  michaelstoneSep 2, 2025
  If the Daikin Heat Pump pump is blocked, especially after being powered off for a long time, lime might be blocking the rotor. Remove the screw of the stator housing and use a screwdriver to turn the ceramic shaft of the rotor back and forth until it is deblocked.
K
Kristina KennedySep 5, 2025
Why is my Daikin Altherma 3 H HT F pump making noise (cavitation)?
- W
  wstricklandSep 5, 2025
  If your Daikin Heat Pump pump is making noise (cavitation), it's likely due to air in the system. Purge air manually on both zones or use the automatic air purge function on both zones.
Z
zsmithSep 7, 2025
What to do if the water pressure relief valve leaks in Daikin Altherma 3 H HT F?
- D
  Desiree EspinozaSep 8, 2025
  If the water pressure relief valve in your Daikin Heat Pump is leaking, it may be because dirt is blocking the outlet. Check whether the pressure relief valve works correctly by turning the red knob on the valve counterclockwise. If you do NOT hear a clacking sound, contact your dealer. If the water keeps running out of the unit, close both the water inlet and outlet shut-off valves first and then contact your dealer.

Daikin Altherma 3 H HT F Specifications

General

Brand	Daikin
Model	Altherma 3 H HT F
Category	Heat Pump
Language	English

Summary

Installer Settings and Configuration

Configuration Wizard

Details initial system setup and configuration wizard steps.

Installer Settings and Configuration

Settings Menu Options

Overview of available settings within the system's menu structure.

Quick Actions and User Management

User Permission Levels

Explains user permission levels and how to change them using PIN codes.

Quick Actions and User Management

Space Heating/Cooling Control

Instructions for turning space heating/cooling on/off and adjusting room temperature.

Quick Actions and User Management

Leaving Water Temperature Adjustment

Procedures for modifying the desired leaving water temperature for heating zones.

Weather-Dependent Curve Setup

Guides on how to change the weather-dependent curve for zones.

Quick Actions and User Management

Domestic Hot Water Control

How to control domestic hot water operations and adjust tank temperature.

General Information and Safety

User Safety Precautions

Essential safety guidelines and warnings for users of the appliance.

General Information and Safety

Documentation Overview

Information about the user reference guide and other related documentation.

General Information and Safety

Warnings and Symbols Interpretation

Explains the meaning of various warning symbols used in the manual.

General Information and Safety

System Components Overview

Diagram and description of typical system components and their layout.

System Operation and User Interface

User Interface Overview

Description of the main components of the user interface: status indicator, LCD, dials.

System Operation and User Interface

Menu Structure Overview

Visual representation of the system's menu structure and user settings.

System Operation and User Interface

Overview of Possible Screens

Illustrates common screens like home, main menu, setpoint, and schedule screens.

System Operation and User Interface

Understanding the Home Screen

Details about icons and information displayed on the home screen.

System Operation and User Interface

Exploring the Main Menu

Guide to navigating the main menu to access different system functions.

System Operation and User Interface

Setpoint Screen Functions

How to view and adjust setpoint values for various system components.

System Operation and User Interface

Detailed Screens with Values

How to view and modify detailed settings and their current values.

Controlling System Operations

Visual Indicators for Operation

How different operation statuses are indicated visually on the interface.

Controlling System Operations

Turning Functions On and Off

Step-by-step instructions for enabling or disabling system functions.

Controlling System Operations

Accessing System Information

How to read out energy data, malfunction history, and other system information.

Heating and Cooling Management

Space Heating/Cooling Control Overview

Explains the stages and methods for controlling space heating and cooling.

Heating and Cooling Management

Room Temperature Adjustment

Steps to change the desired room temperature via the setpoint screen.

Identifying Temperature Control Methods

How to determine if room or leaving water temperature control is used.

Heating and Cooling Management

Leaving Water Temperature Adjustment

Procedures for adjusting the desired leaving water temperature, especially for troubleshooting.

Domestic Hot Water Management

DHW Control Modes

Describes the different modes for domestic hot water control: Reheat, Schedule, Schedule+Reheat.

Domestic Hot Water Management

Scheduled DHW Heating

Details on how the DHW tank operates based on a heating schedule.

Domestic Hot Water Management

DHW Temperature Adjustment

How to change the DHW tank temperature setpoint in Reheat only mode.

Powerful DHW Operation

Explains how to activate and use the powerful operation mode for immediate hot water needs.

Scheduling and Energy Management

Using Preset Values

How preset values simplify setting common parameters like setpoints and energy prices.

Setting Energy Prices

Guide to setting electricity and gas prices for energy cost tracking.

Scheduling and Energy Management

Programming Schedules

Instructions for creating and managing custom schedules for various system functions.

Weather-Dependent Operation

Understanding Weather-Dependent Curves

Explains the concept and advantage of weather-dependent operation.

Weather-Dependent Operation

2-Points Curve Configuration

Details on defining a weather-dependent curve using two setpoints.

Slope-Offset Curve Configuration

Details on adjusting a weather-dependent curve using slope and offset parameters.

Weather-Dependent Operation

Using Weather-Dependent Curves

Steps to configure setpoint modes and change weather-dependent curve types.

Additional Features and Tips

Time, Date, and Quiet Mode

How to configure time/date settings and manage quiet mode for reduced noise.

Holiday Mode Configuration

Guide to setting up and activating holiday mode to save energy during absences.

Energy Saving Tips

Room Temperature Savings

Tips for optimizing room temperature settings to reduce energy consumption.

Water Temperature Savings

Advice on setting leaving water and DHW tank temperatures for efficiency.

Maintenance and Service

Routine Maintenance Procedures

Information on user tasks for maintaining the unit and its interface.

Troubleshooting and Error Resolution

Displaying Malfunction Help Text

How to access detailed error descriptions and codes for malfunctions.

Checking Malfunction History

How to view a list of recent malfunctions recorded by the system.

Troubleshooting and Error Resolution

Room Temperature Symptoms

Troubleshooting steps for feeling too cold or hot in the living room.

Cold Tap Water Symptoms

Solutions for issues related to insufficient hot water temperature at the tap.

Troubleshooting and Error Resolution

Heat Pump Failure Symptoms

Actions to take when the heat pump fails and how the backup heater operates.

Gurgling Noise Troubleshooting

Guidance on resolving gurgling noises, potentially related to air in the system.

System Relocation

Relocation Overview

Information regarding relocating system parts and contacting the installer.

Product Disposal

Disposal Guidelines

Important notices regarding the proper disposal of the unit and its components.

Glossary of Terms

Technical Terminology

Definitions of key terms and acronyms used throughout the manual.

Related product manuals

Daikin Altherma 3 H HT

284 pages

Daikin Altherma 3 H HT W

36 pages

Daikin Altherma 3 H HT F+W

64 pages

Daikin Altherma 3 H HT Series

20 pages

Daikin Altherma 3 H HT F Series

24 pages

Altherma 3 H HT EPRA18DAW1

20 pages

Altherma 3 H HT ECH2O Series

40 pages

Daikin Altherma 3 H MT F

296 pages

Daikin Altherma 3 H F

60 pages

Daikin Altherma 3 H F+W

60 pages

Daikin 3 H HT F

40 pages

Daikin Altherma 3 H W

32 pages

Daikin Altherma 3 H HT F User Manual

Table of Contents

Other manuals for Daikin Altherma 3 H HT F

Questions and Answers:

Daikin Altherma 3 H HT F Specifications

Summary

Installer Settings and Configuration

Configuration Wizard

Installer Settings and Configuration

Settings Menu Options

Quick Actions and User Management

User Permission Levels

Quick Actions and User Management

Space Heating/Cooling Control

Quick Actions and User Management

Leaving Water Temperature Adjustment

Weather-Dependent Curve Setup

Quick Actions and User Management

Domestic Hot Water Control

General Information and Safety

User Safety Precautions

General Information and Safety

Documentation Overview

General Information and Safety

Warnings and Symbols Interpretation

General Information and Safety

System Components Overview

System Operation and User Interface

User Interface Overview

System Operation and User Interface

Menu Structure Overview

System Operation and User Interface

Overview of Possible Screens

System Operation and User Interface

Understanding the Home Screen

System Operation and User Interface

Exploring the Main Menu

System Operation and User Interface

Setpoint Screen Functions

System Operation and User Interface

Detailed Screens with Values

Controlling System Operations

Visual Indicators for Operation

Controlling System Operations

Turning Functions On and Off

Controlling System Operations

Accessing System Information

Heating and Cooling Management

Space Heating/Cooling Control Overview

Heating and Cooling Management

Room Temperature Adjustment

Identifying Temperature Control Methods

Heating and Cooling Management

Leaving Water Temperature Adjustment

Domestic Hot Water Management

DHW Control Modes

Domestic Hot Water Management

Scheduled DHW Heating

Domestic Hot Water Management

DHW Temperature Adjustment

Powerful DHW Operation

Scheduling and Energy Management

Using Preset Values

Setting Energy Prices

Scheduling and Energy Management

Programming Schedules

Weather-Dependent Operation

Understanding Weather-Dependent Curves

Weather-Dependent Operation

2-Points Curve Configuration

Slope-Offset Curve Configuration

Weather-Dependent Operation

Using Weather-Dependent Curves

Additional Features and Tips

Time, Date, and Quiet Mode

Holiday Mode Configuration

Energy Saving Tips

Room Temperature Savings

Water Temperature Savings

Maintenance and Service