Daikin Altherma 3 M - Page 215

3 | Components
Service manual
215
EBLA09~16DA + EDLA09~16DA
Daikin Altherma 3 M
ESIE20-06A – 2021.03
a
a
b
d
d
d
c
d
a Heat sink cover screw
b Heat sink cover
c Main PCB mounting plate
d Main PCB mounting plate fixation screw
9 Connect all connectors to the main PCB.
10 Fix the cables to the main PCB mounting plate using new tie straps.
Is the problem solved? Action
Yes No further actions required.
No Return to "Checking
procedures"[4204] of the noise filter
PCB and continue with the next
procedure.
To remove a fuse of the noise filter PCB
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see "3.17Plate work"[4230].
1 Remove the fuse from the PCB.