Daikin Altherma EHBH08DA6V7 - 4 Installation; Opening the Units; To Open the Indoor Unit; Mounting the Indoor Unit

4 Installation
Installation manual
7
EHBH/X04+08DA*V7
Daikin Altherma 3 R W
4P618951-1 – 2020.03
4 Installation
4.1 Opening the units
4.1.1 To open the indoor unit
Overview
1
2
3
1
4
4
1 Front panel
2 Switch box cover
3 Switch box
4 User interface panel
Open
1 Remove the front panel.
2
2
1
3
2 If you have to connect electrical wiring, remove the switch box
cover.
4×
3 If you have to do work behind the switch box, open the switch
box.
2×
1
2
4 If you have to do work behind the user interface panel or upload
new software into the user interface, open the user interface
panel.
1
2
3
2×
5 Optional: Remove the user interface panel.
NOTICE
If you remove the user interface panel, also disconnect the
cables from the back of the user interface panel to prevent
damage.
3
1
2
4.2 Mounting the indoor unit
4.2.1 To install the indoor unit
1 Fix the wall bracket (accessory) to the wall (level) with 2 Ø8mm
bolts.