ARC417 Series Si10-416A
218 Operation
Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate
level helps save energy.
Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors
increases the cooling (heating) effect.
The air conditioner always consumes 15 – 35 watts of
electricity even while it is not operating.
If you are not going to use the air conditioner for a long
period, for example in spring or autumn, turn the breaker OFF.
Use the air conditioner in the following conditions.
(*1) Use in humidity 60 % or lower when using the unit at an
outdoor temperature of 10˚C or lower.
Clogged air filters cause inefficient
operation and waste energy. Clean them
once in about every two weeks.
For cooling: 26˚C – 28˚C
For heating:20˚C – 24˚C
NOTE
Tips for saving energy
Please note
Recommended temperature setting
Mode Operating conditions
Outdoor temperature
2A safety device may work to stop the
operation.
(In multi system, it may work to stop
the operation of the outdoor unit
only.)
2Condensation may occur on the
indoor unit and drip.
2A safety device may work to stop the
operation.
Indoor temperature
: 18 to 32 ˚C
Indoor humidity : 80% max. (*1)
RKD, RXD, RMX : –5 to 46 ˚C
3MX : 21 to 43 ˚C
4MX : 10 to 43 ˚C
3MK, 4MK : 10 to 46 ˚C
RMK : 5 to 46 ˚C
Outdoor temperature
Indoor temperature
: 10 to 30 ˚C
RKD, RXD : –15 to 24 ˚C
3MX, 4MX : –10 to 24 ˚C
RMX : –15 to 24 ˚C
If operation is continued out of this range
COOL/
DRY
HEAT
To Next Page
Loading...
