What to do if the safety breaker cuts off the operation of Daikin ATXB35C2V1B frequently?
If the safety breaker, a fuse, or the earth leakage breaker cuts off the operation of your Daikin Air Conditioner frequently, it's recommended to immediately call the service shop.
Why Daikin Air Conditioner does not operate and OPERATION lamp is off?
If your Daikin Air Conditioner isn't operating and the OPERATION lamp is off, check these items: * Confirm that a breaker hasn’t turned off or a fuse blown. * Ensure there isn’t a power failure. * Verify that batteries are correctly installed in the remote controller. * Check if the timer setting is correct.
What to do if water leaks from Daikin ATXB35C2V1B Air Conditioner indoor unit?
If you notice water leaking from the indoor unit of your Daikin Air Conditioner, it's recommended to immediately call the service shop.
Why is my Daikin ATXB35C2V1B cooling (heating) effect poor?
If your Daikin Air Conditioner is not cooling (or heating) effectively, consider the following: * Ensure that the air filters are clean. * Check for any obstructions blocking the air inlet or outlet of both the indoor and outdoor units. * Verify that the temperature setting is appropriate for your needs. * Make sure all windows and doors are closed properly. * Confirm that the airflow rate and direction are set correctly.
Why is there a burning smell coming from my Daikin Air Conditioner?
If you notice a burning smell coming from your Daikin Air Conditioner, it's recommended to immediately call the service shop.
Why Daikin ATXB35C2V1B remote controller does not work properly?
If your Daikin Air Conditioner remote controller isn't working correctly, replace all the batteries with new, size AAA.LR03 (alkaline) batteries.
Why does mist come out of the indoor unit of Daikin ATXB35C2V1B?
If mist comes out of the indoor unit of your Daikin Air Conditioner, this happens when the air in the room is cooled into mist by the cold airflow during COOL operation. Also, this is because the air in the room is cooled by the heat exchanger and becomes mist during defrosting operation.
What to do if abnormal functioning happens during Daikin ATXB35C2V1B Air Conditioner operation?
If you're experiencing an abnormal functioning during the operation of your Daikin Air Conditioner, turn the breaker off, then turn it back on, and try operating the air conditioner with the remote controller.
What to do if a switch or a button often fails to work properly on Daikin ATXB35C2V1B?
If a switch or button on your Daikin Air Conditioner often fails to work properly, it's recommended to immediately call the service shop.
What to do if I hear abnormal sound during Daikin Air Conditioner operation?
If you hear an abnormal sound during the operation of your Daikin Air Conditioner, it's recommended to immediately call the service shop.
General| Type | Air conditioner indoor unit |
|---|---|
| Ionizer | - |
| Multi-split | Yes |
| Product color | White |
| Compressor type | Rotary |
| Gas hose diameter | 9.5 mm |
| Hose length (max) | 15 m |
| Drain hose diameter | 18 mm |
| Liquid hose diameter | 6.35 mm |
| Refrigerating medium | R410A |
| Cooling capacity (max) | 13000 BTU/h |
| Cooling capacity (min) | 4400 BTU/h |
| Heating capacity (max) | 16300 BTU/h |
| Timer duration (maximum) | 24 h |
| Air conditioner functions | Cooling, Dehumidifying, Fan, Heating |
| Cooling capacity in watts (max) | 3800 W |
| Cooling capacity in watts (min) | 1300 W |
| Heating capacity in watts (max) | 4800 W |
| Cooling capacity in watts (nominal) | 3300 W |
| Cooling energy efficiency (EER, W/W) | 3.21 |
| Heating energy efficiency (COP, W/W) | 3.71 |
| Operating temperature (cooling) (T-T) | -10 - 46 °C |
| Operating temperature (heating) (T-T) | -15 - 18 °C |
| Seasonal efficiency rating (cooling) (SEER) | 6.02 |
| Heating capacity in watts (nominal) (Warmer heating season) | - W |
| Heating capacity in watts (nominal) (Average heating season) | 3500 W |
| Seasonal efficiency rating (heating) (SCOP) (Average heating season) | 4.04 |
| Current | 1 A |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Design load (cooling) | 3.3 kW |
| Power consumption (cooling) (max) | 1030 W |
| Power consumption (heating) (max) | 940 W |
| Annual energy consumption (cooling) | 192 kWh |
| Hourly energy consumption (cooling) | - kWh |
| Design load (heating) (Warmer heating season) | - kW |
| Design load (heating) (Average heating season) | 2.8 kW |
| Energy efficiency class (heating) (Average heating season) | A+ |
| Annual energy consumption (heating) (Average heating season) | 970 kWh |
| Indoor unit type | Wall-mountable |
| Indoor unit depth | 216 mm |
| Indoor unit width | 770 mm |
| Indoor unit height | 283 mm |
| Indoor unit weight | 8000 g |
| Indoor units quantity | 1 |
| Cooling airflow (indoor unit) | 462 m³/h |
| Heating airflow (indoor unit) | 504 m³/h |
| Indoor unit noise level (low speed) | 23 dB |
| Indoor unit noise level (high speed) | 58 dB |
| Outdoor unit noise level | - dB |
Identifies components of the indoor unit including filters, sensors, and outlets.
Identifies components of the outdoor unit, such as air inlets, outlets, and piping.
Steps for inserting batteries into the remote controller.
Guidelines for aiming the remote controller transmitter at the indoor unit.
Instructions for mounting the remote controller holder securely on a wall.
How to select and begin operating the air conditioner using the remote.
How to turn off the air conditioner using the ON/OFF button.
Adjusting the desired temperature for cooling or heating.
Initiating automatic swinging of the horizontal flap for air distribution.
Stopping the flap at a specific angle while in auto swing mode.
Manual adjustment of the vertical louvers for directional airflow.
Activating the mode for gentle, indirect airflow.
Deactivating the COMFORT AIRFLOW mode.
Engaging the mode for maximum cooling or heating effect.
Disengaging the POWERFUL operation mode.
Activating the energy-saving mode to limit power consumption.
Deactivating the ECONO operation mode.
Instructions for setting the timer to automatically switch the unit off.
Cancelling a previously set OFF timer.
Instructions for setting the timer to automatically switch the unit on.
Cancelling a previously set ON timer.
Using both ON and OFF timers simultaneously for scheduled operation.
Instructions for wiping the indoor unit and remote controller with a dry cloth.
Procedures for opening, removing, and cleaning the front panel of the indoor unit.
Guidance on cleaning and replacing the air filters and air-purifying filters.
To Next Page
