English 15
2
Press On/Off button. ●
The Operation lamp (green) will be lit
and the system will start operating.
3
Set temperature
28°C
Cool
Return Setting
The set temperature will increase by ●
1°C when button is pressed and
decrease by 1°C when button is
pressed.
No temperature settings are possible while in fan mode.*
4
Set temperature
28°C
Cool
Return Setting
Low Middle
High
To make fan speed control, press Fan ●
speed control button and select the
desired fan speed from Low, Middle or
High.
Two fan speed adjustment levels Low, High may be available *
depending on the type of indoor unit.
The system may be in automatic fan speed control for *
mechanical protection purposes.
The system may be in automatic fan speed control according to *
the room temperature.
The fan may stop operating, which, however, is not a failure.
The completion of fan speed selection may take time, which, *
however, is not a failure.
5
Make airfl ow direction settings from the main menu ●
(see page 28).
The airfl ow direction of the system cannot be changed unless *
the system is provided with a function to allow airfl ow direction
changes.
01_EN_3P243520-1B.indd 1501_EN_3P243520-1B.indd 15 5/15/2009 10:21:03 AM5/15/2009 10:21:03 AM
To Next Page
Loading...
Need help?
General
