English 14
Operate the indoor unit with the remote con-
troller of the same number.
Signal transmitted from a remote controller of
a different number cannot be accepted. (If
the number is not mentioned, it is considered
as “1”)
2. The system operates but it does not
sufficiently cool or heat.
• If the set temperature is not proper.
• If the FAN SPEED is set to LOW
SPEED.
• If the air flow angle is not proper.
Contact the place of purchase in the fol-
lowing case.
WARNING
When you detect a burning odor, shut
OFF power immediately and contact the
place of purchase. Using the equipment
in anything but proper working condition
can result in equipment damage, electric
shock and/or fire.
1
Number
[Trouble]
The RUN lamp of the indoor unit is flashing
and the unit does not work at all.
[Remedial action]
Check the malfunction code (A1 - UF) on the
remote control and contact the place of pur-
chase. (See page 12.)
Disposal requirements
Batteries supplied with the remote controller
are marked with this symbol.
This means that the batteries shall not be
mixed with unsorted household waste.
If a chemical symbol is printed beneath the
symbol, this chemical symbol means that the
battery contains a heavy metal above a cer-
tain concentration. Possible chemical sym-
bols are:
Pb: lead (>0.004%)
Waste batteries must be treated at a special-
ized treatment facility for re-use.
By ensuring waste batteries are disposed of
correctly, you will help to prevent potential
negative consequences for the environment
and human health.
MODE
TIMER
RESERVE
CANCEL
DOWN
UP
/TEST
SWING
FAN
TIME
TEMP
ON OFF
UNIT N
O
.
CODE
Malfunction Code
Unit No. which
sensed trouble
INSPECTION
display
01_EN_3P107422-8S.fm Page 14 Thursday, May 29, 2008 7:41 PM
To Next Page
Loading...
