“ ” on the left-hand of the malfunction
code blinks.
EMERGENCY STOP
18
When the air conditioner stops in
emergency, the OPERATING
INDICATOR LAMP on the indoor unit
starts blinking.
Take the following steps yourself to
read the malfunction code that appears
on the display.
Contact your local dealer with this code.
It will help pinpoint the cause of the
trouble, speeding up the repair.
1
3 5
7
2 4
6
II.
1
Press the INSPECTION button to
select the inspection mode “ ”.
“ ” appears on display and blinks.
“UNIT No.” appears.
2
Press PROGRAMMING TIMER button
and change the unit number.
Press to change the unit number until the
indoor unit beeps and perform the following
operation according to the number of beeps.
Number of beeps
3 short beeps …………Perform all steps from
to .
1 short beep …………Perform and
steps.
1 long beep …………Normal state.
3
6
3
6
3
Press OPERATION MODE SELECTOR
button.
“ ” on the right-hand of the malfunction
code blinks.
4
Press PROGRAMMING TIMER button
and change the malfunction code.
Press until the indoor unit beeps twice.
5
Press OPERATION MODE SELECTOR
button.
6
Press PROGRAMMING TIMER button
and change the malfunction code.
Press until the indoor unit makes a long beep.
The malfunction code is fixed when the
indoor unit makes a long beep.
To Next Page
Loading...
