14
Troubleshooting
Troubleshooting
The following table provides brief descriptions of how to handle trouble or uncertainties
when you install the Wireless LAN connecting adapter or make connection settings.
Refer to the FAQ on our website for more details.
When this happens Explanation and where to check
None of the LEDs light. • Try to operate the unit with the infrared remote controller.
• Turn off the air conditioner and restart it.
• Make sure the LEDs are not disabled in the application.
• Check the installation.
The Wireless LAN connecting adapter
is not vis ble on the Home gateway
controller / Home gateway application
after the Wireless LAN connecting
adapter has been configured.
• If the [RUN] lamp is blinking, retry to connect the
• If the [RUN] lamp is lit, make sure that Home gateway
• Check that the power is on.
• Check that the [RUN] lamp is lit.
Wireless LAN connecting adapter to the wireless
Make sure the Wireless LAN connecting adapter is
close enough to the router (Wireless LAN access point).
controller or Home gateway application is connected to
the same Wireless LAN network as the Wireless LAN
Home gateway controller / Home gateway application for
Please refer to the documentation that comes with your
network.
connecting adapter.
more information.
None of the above work. • Refer to the FAQ on:
http://www.daikinthai.com/wlan3/modbus
To Next Page
Loading...
