What to do if the safety breaker, a fuse, or the ground leakage breaker cuts off the operation frequently of Daikin CTXS07JVJU?
If the safety breaker, a fuse, or the ground leakage breaker cuts off the operation of your Daikin Air Conditioner frequently, turn the breaker off and call the service shop.
What to do if the power cord of Daikin CTXS07JVJU Air Conditioner is abnormally hot or damaged?
If the power cord of your Daikin Air Conditioner is abnormally hot or damaged, call the service shop immediately.
Why Daikin CTXS07JVJU Air Conditioner automatically resumes operation after a power failure?
If your Daikin Air Conditioner automatically resumes operation after a power failure, simply wait for it to restart.
Why Daikin CTXS07JVJU louvers do not immediately swing?
If the louvers of your Daikin Air Conditioner do not immediately swing, it means that the air conditioner is adjusting the louvers position. The louvers will start moving soon.
Why hot air does not flow out soon after the start of HEAT operation of Daikin CTXS07JVJU Air Conditioner?
When you start HEAT operation on your Daikin Air Conditioner, you should wait for 1 to 4 minutes for hot air to flow out.
General| Cooling Capacity | 2.0 kW |
|---|---|
| Cooling Capacity (BTU) | 7, 000 BTU |
| Heating Capacity | 2.5 kW |
| HSPF | 3.8 |
| Refrigerant | R-32 |
| Energy Efficiency Ratio (Heating) | 3.8 |
| Type | Split |
| Indoor Noise Level | 19 dBA |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Noise Level | 19 dBA |
| Outdoor Unit Noise Level | 46 dBA |
| Sound Level (dB) | 46 dB |
Explains hazard symbols and their meanings for safe operation.
How to choose and start the desired operating mode for the air conditioner.
How to use the infrared sensor for automatic operation adjustments and energy saving.
Explains common non-malfunction incidents and their causes.
Checklist for common problems to verify before contacting service.
When to call a service technician and important warnings for abnormal conditions.
How to display error codes received from the indoor unit via the remote controller.
A table listing system and unit error codes and their meanings.
To Next Page