Need help?Do you have a question about the Daikin CTXS07WVJU9 and is the answer not in the manual?
General| Cooling Capacity | 2.0 kW |
|---|---|
| Heating Capacity | 2.5 kW |
| Energy Efficiency Rating | A++ |
| Refrigerant | R-32 |
| Indoor Unit Dimensions (W x H x D) | 35-1/16" x 11-5/8" x 9-5/8" |
| Indoor Unit Weight | 26 lbs |
| Outdoor Unit Dimensions (W x H x D) | 30-1/8" x 21-1/2" x 11-7/16" |
| Outdoor Unit Weight | 68 lbs |
| SEER | 6.1 |
| Energy Efficiency Ratio (EER) | 3.5 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Cooling Capacity (BTU/hr) | 7000 BTU/hr |
| Sound Level (dB) | 19 dB |
| Operating Temperature (Cooling) | 0 to 46 °C |
| Operating Temperature (Heating) | -15°C to 24°C |
| Type | Split System Air Conditioner |
Crucial safety information for workers and users to prevent injury or damage.
Explanation of symbols for clear communication.
Records of manual updates and changes.
Lists the air conditioner models covered by this manual.
Details the features and functions of indoor units.
Details the features and functions of outdoor units.
Detailed technical specifications for indoor units.
Detailed technical specifications for outdoor units.
Wiring details for sensor kits.
Wiring for wired remote controllers.
Wiring for wireless receivers.
Wiring for wireless kits.
Wiring diagrams for outdoor unit PCBs and connectors.
Specific functions for duct/ceiling cassette indoor units.
Technical details on control logic and parameters.
How thermistors are used for temperature sensing and control.
How compressor frequency is managed for capacity.
Mechanisms to prevent freezing, high pressure, and heating peak cuts.
Mode hierarchy, start-up controls, current limits, and pipe temps.
Lists remote controllers and their compatibility with models.
Details on various remote controller models and their functions.
Explains error codes displayed on remote controllers and LEDs.
Specific troubleshooting steps for different unit types and outdoor units.
Procedures for checking specific components like thermistors and PCBs.
Steps like pump down, forced cooling, and wiring checks before operation.
Steps for performing trial operation for different unit types.
Configuration options for different unit types and outdoor units.
Specific maintenance steps like silicone grease application.
Visual representations of refrigerant piping for various units.
Electrical wiring diagrams for indoor and outdoor units.
Specifies the operational limits for different conditions.
To Next Page
