What to do if there is abnormal sound during operation of Daikin Air Conditioner?
If you hear an abnormal sound during the operation of your Daikin Air Conditioner, call the service shop immediately.
Why Daikin CTXS07JVJU outdoor unit emits water or steam?
Moisture in the air condenses into water on the cool surface of outdoor unit piping and drips from your Daikin Air Conditioner.
Why Daikin Air Conditioner operation does not start soon?
When you start your Daikin Air Conditioner, you should wait for about 3 minutes for the operation to start.
Why hot air does not flow out soon after the start of HEAT operation of Daikin CTXS07JVJU Air Conditioner?
When you start HEAT operation on your Daikin Air Conditioner, you should wait for 1 to 4 minutes for hot air to flow out.
Why Daikin CTXS07JVJU louvers do not immediately swing?
If the louvers of your Daikin Air Conditioner do not immediately swing, it means that the air conditioner is adjusting the louvers position. The louvers will start moving soon.
Why Daikin CTXS07JVJU Air Conditioner automatically resumes operation after a power failure?
If your Daikin Air Conditioner automatically resumes operation after a power failure, simply wait for it to restart.
What to do if the power cord of Daikin CTXS07JVJU Air Conditioner is abnormally hot or damaged?
If the power cord of your Daikin Air Conditioner is abnormally hot or damaged, call the service shop immediately.
What to do if the safety breaker, a fuse, or the ground leakage breaker cuts off the operation frequently of Daikin CTXS07JVJU?
If the safety breaker, a fuse, or the ground leakage breaker cuts off the operation of your Daikin Air Conditioner frequently, turn the breaker off and call the service shop.
What to do if a switch or a button often fails to work properly on Daikin CTXS07JVJU?
If a switch or button on your Daikin Air Conditioner often fails to work properly, call the service shop immediately.
Why my Daikin CTXS07JVJU Air Conditioner does not operate?
If your Daikin Air Conditioner isn't operating, first check a few things: ensure the breaker hasn't tripped or a fuse blown, verify there's no power failure, confirm the batteries are correctly installed in the remote, check the timer settings, make sure the air filters are clean, and ensure nothing is blocking the air inlet or outlet of either the indoor or outdoor units.
Explains hazard symbols and their meanings for safe operation.
How to choose and start the desired operating mode for the air conditioner.
How to use the infrared sensor for automatic operation adjustments and energy saving.
Explains common non-malfunction incidents and their causes.
Checklist for common problems to verify before contacting service.
When to call a service technician and important warnings for abnormal conditions.
How to display error codes received from the indoor unit via the remote controller.
A table listing system and unit error codes and their meanings.
General| Cooling Capacity | 2.0 kW |
|---|---|
| Cooling Capacity (BTU) | 7, 000 BTU |
| Heating Capacity | 2.5 kW |
| HSPF | 3.8 |
| Refrigerant | R-32 |
| Energy Efficiency Ratio (Heating) | 3.8 |
| Type | Split |
| Indoor Noise Level | 19 dBA |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Noise Level | 19 dBA |
| Outdoor Unit Noise Level | 46 dBA |
| Sound Level (dB) | 46 dB |
To Next Page