The Digital Controller ESIE10-01
2–12 Part 2 – Functional Description
3
1
2
4
5
Note: Parameters with an “*” are available without entering a password.
Home Page
View/Set Unit
Status/Settings >
Enter Password Set-Up >
Continue W/O Password Temperatures >
Date/Time/Schedules >
Power Conservation >
Main Menu
LON Setup
BACnet IP Setup
View/Set - Unit > BACnet MSTP Setup
View/Set - Circuit > Modbus Setup
Unit Status * R AWM Setup
Active Setpoint * R
Evap Leaving Water Temp * R Design Conditions >
Evap Entering Water Temp * R Alarm Limits >
Unit Capacity * R
Unit Current R Menu Password >
Softload Limit Value R
Network Limit Value R
Demand Limit Value R View/Set Circuit >
Unit Mode * R
Control Source * R/W Status/Settings >
Current Limit Setpoint R/W Compressor >
Time Until Restart >
Scheduled Maintenance > Time Until Restart
Alarms > Compressor 1 Cycle Time Remaining * R
Compressor 2 Cycle Time Remaining * R
About This Chiller > Compressor 3 Cycle Time Remaining * R
Compressor 4 Cycle Time Remaining * R
Scheduled Maintenance
Next Maintenance Month/Year * R/W
Service Support Reference * R
Alarms >
Alarm Active >
Alarm Log >
About This Chiller
Model Number * R
G.O. Number * R
Unit Serial Number * R
Starter Model Number(s) * R
Starter Serial Number(s) * R
Firmware Version * R
Application Version * R
Application GUID * R
HMI GUID * R
To Next Page
Loading...
