To Next PageTo Next PageWhat causes Daikin Chiller error code UA?
Daikin Chiller error code UA indicates a type connection problem. Wait until the initialization between the outdoor module and hydro module is finished (after power ON, wait at least 12 minutes). If the issue persists, contact your local dealer.
What causes Daikin EWAQ040BAW Chiller error code A1?
Daikin Chiller error code A1 indicates a failure of writing memory (EEPROM error). Contact your local dealer.
What does Daikin EWAQ040BAW error code C1 mean?
Daikin Chiller error code C1 indicates bad ACS communication. Contact your local dealer.
Emphasizes switching off power, avoiding hot parts, and managing alarm settings for safe operation.
Discusses site selection, animal deterrence, public access restrictions, environmental factors, and cold climate considerations.
Details precautions for connecting water pipes, including material compatibility, thread sealant, and flow regulation.
Lists essential checks before powering up the unit, including wiring, earth connection, and component integrity.
Explains using field setting [E-04] for pump-only operation to effectively remove air from the water circuit.
Specifies the target water temperature at low ambient conditions for optimal heating performance.
Specifies the target water temperature at high ambient conditions for efficient cooling/heating.
Lists essential checks before unit startup, including panel closure, electrical safety, and component integrity.
Outlines procedures for performing unit test runs for heating/cooling operations and verifying performance.
Provides a step-by-step guide for initial setup of space cooling and heating operations.
Explains the remote controller's role in full control of the installation, including basic functions and features.
Lists error codes, their causes, and corrective actions for diagnosing and resolving unit issues.
Provides a step-by-step guide for accessing and changing field settings using the remote controller.
General