To Next PageTo Next PageWhy Daikin Air Conditioner system does not operate at all?
If your Daikin Air Conditioner system isn't operating at all, here are a few things to check: * First, see if there's a power failure and wait until power is restored. * Second, check for any blown fuses and turn off the power supply. * Third, check if the breaker is blown and turn the power on with the breaker switch in the ON position.
What to do if Daikin Air Conditioner stops after starting?
If your Daikin Air Conditioner stops operating after starting, examine these potential causes: 1. Check the air inlets and outlets of both the outdoor and indoor units. If there are any obstructions, remove them to ensure proper ventilation. 2. Inspect the air filter. If it's clogged, have a qualified service person clean it for you.
What to do if Daikin FA71FVEK displays 'INSPECTION' and 'MALFUNCTION CODE'?
If the display on your Daikin Air Conditioner shows 'INSPECTION', 'UNIT No.', and the OPERATION lamp is flashing along with a 'MALFUNCTION CODE', notify your Daikin dealer and provide them with the display information.
General| Style | Split-type |
|---|---|
| Color | White |
| Features | - |
| Moisture Removal | - |
| Sound Pressure Level | Quiet 32 dB(A) |
| Indoor (Heating): High 44 dB(A) | 26 - 39 / 29 - 41 dBA |
| Refrigerant Type | R-22 |
| Refrigerant Charge | 5.50 kg |
| Frequency | 50 Hz |
| Voltage | 220–240 V |
| Battery Life | - |
| Battery Capacity | - |
| Depth | 580 mm |
| Height | 260 mm |
| Width | 1300 mm |
| Net Weight | 31 kg |
Identifies and explains the components of indoor/outdoor units and remote controller.
Explains the function of key buttons like ON/OFF, Operation Lamp, and Test Operation.
Details the various display indicators on the remote, such as mode, temperature, and timer settings.
Guides through cooling, heating, automatic, fan, and program dry modes.
Explains the defrost operation mode, its indicators, and duration.
Step-by-step guide for removing, cleaning, and resetting the air filters.
Instructions for cleaning the air outlet and exterior panels of the unit.
Checks and steps required before restarting the unit after a prolonged period of non-operation.
Lists common occurrences like no immediate restart, mist, or noise that are not actual system malfunctions.
Steps to resolve issues where the system does not operate at all or stops after initial operation.
Guidance for insufficient cooling or heating, checking blockages, filter, settings, and room conditions.
