Daikin FBA35A2VEB9 Installation Manual

Daikin FBA35A2VEB9

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Installation manual

Split system air conditioners

English

Installation manual

Split system air conditioners

FBA35A2VEB

FBA50A2VEB

FBA60A2VEB

FBA71A2VEB

FBA100A2VEB

FBA125A2VEB

FBA140A2VEB

FBA35A2VEB9

FBA50A2VEB9

FBA60A2VEB9

FBA71A2VEB9

ADEA35A2VEB

ADEA50A2VEB

ADEA60A2VEB

ADEA71A2VEB

ADEA100A2VEB

ADEA125A2VEB

Table of Contents

Other manuals for Daikin FBA35A2VEB9

User Reference Guide12 pages

Operation Manual12 pages

Questions and Answers:

S
Shane ParkerAug 14, 2025
Why is my Daikin FBA35A2VEB9 Air Conditioner cooling or heating insufficiently?
- E
  Evan HenryAug 15, 2025
  There might be several reasons why your Daikin Air Conditioner isn't cooling or heating effectively. First, check if the air inlet or outlet of either the indoor or outdoor unit is blocked by any obstacles. Remove any obstructions to ensure free airflow. Next, examine the air filter to see if it's clogged, and clean it if necessary. Also, verify the temperature setting and fan speed, making sure they are appropriately adjusted. Ensure doors and windows are closed to prevent drafts and use curtains or blinds to block direct sunlight. Overcrowding or excessive heat sources in the room can also impact cooling performance.
J
Jennifer DunnAug 18, 2025
What to do if my Daikin FBA35A2VEB9 system stops immediately after starting?
- B
  Bradley JonesAug 18, 2025
  If your Daikin Air Conditioner system stops right after starting, check whether the air inlet or outlet of the outdoor or indoor unit is blocked. If there are obstacles, remove them to allow air to flow freely. Also, check if the air filter is clogged, and contact your dealer to clean it.
M
Michael LiuAug 21, 2025
What to do if my Daikin FBA35A2VEB9 system does not operate at all?
- J
  Janet CooperAug 21, 2025
  If your Daikin Air Conditioner system isn't working, first check for a power failure and wait for the power to be restored. If a power failure occurred during operation, the system will restart automatically once power returns. Also, inspect the fuse and breaker. If a fuse has blown or the breaker is activated, replace the fuse or reset the breaker.
S
Samuel CarrollAug 25, 2025
Why is my Daikin FBA35A2VEB9 not cooling or heating enough?
- L
  loribassAug 26, 2025
  To address insufficient cooling or heating with your Daikin Air Conditioner: * Ensure that the air inlet or outlet of the outdoor or indoor unit is free from obstructions. * Check the air filter for clogs and contact your dealer to clean it. * Verify the temperature setting and adjust as needed. * Confirm that the fan speed is not set to low. * Make sure the airflow angle is properly adjusted. * Close any open doors or windows. * Use curtains or blinds to block direct sunlight. * Reduce the number of occupants in the room during cooling operation and minimize heat sources.
N
Nicholas TorresAug 27, 2025
Why does my Daikin FBA35A2VEB9 Air Conditioner stop suddenly and the operation lamp blinks?
- J
  Janet BryantAug 28, 2025
  If your Daikin Air Conditioner stops suddenly and the operation lamp blinks, check the following: 1. Make sure the air filter is not clogged, contact your dealer to clean the air filter. 2. Ensure that the air inlet or outlet of the outdoor or indoor unit is not blocked; remove any obstacles, turn the breaker OFF and back ON. If the lamp continues to blink, contact your dealer. 3. Verify that all indoor units connected to the outdoor unit in the multi-system are operating in the same mode.
A
Adam MaynardAug 31, 2025
What to do if my Daikin Air Conditioner operation stops suddenly and the operation lamp blinks?
- A
  andrewsdarleneAug 31, 2025
  If your Daikin Air Conditioner stops suddenly and the operation lamp is blinking, start by checking if the air filter is clogged, and contact your dealer to clean it. Also, check for any obstructions blocking the air inlet or outlet of the outdoor or indoor unit. Remove any obstacles, turn the breaker OFF and back ON. If the lamp continues to blink, contact your dealer. Ensure all indoor units connected to the outdoor unit in the multi-system are operating in the same mode.
T
Trevor WernerSep 3, 2025
What to do if my Daikin Air Conditioner stops immediately after starting?
- M
  Megan MartinSep 3, 2025
  If your Daikin Air Conditioner stops immediately after starting, check if the air inlet or outlet of the outdoor or indoor unit is not blocked by obstacles. Remove any obstructions to ensure free airflow. Also, check if the air filter is clogged and contact your dealer to clean it.
P
pennychenSep 6, 2025
What to do if the user interface display of my Daikin FBA35A2VEB9 Air Conditioner indicates the unit number, the operation lamp flashes and the malfunction code appears?
- J
  Jerry BartlettSep 6, 2025
  If the user interface display shows the unit number, the operation lamp flashes, and a malfunction code appears, notify your installer and report the malfunction code.
J
Jacob HensleySep 12, 2025
What to do if my Daikin FBA35A2VEB9 Air Conditioner displays a malfunction code?
- A
  adam51Sep 12, 2025
  If the user interface display of your Daikin Air Conditioner shows the unit number, the operation lamp flashes, and a malfunction code appears, notify your installer and report the malfunction code.

Daikin FBA35A2VEB9 Specifications

General

Model	FBA35A2VEB9
Cooling Capacity	3.5 kW
Heating Capacity	4.0 kW
Power Supply	220-240V, 50Hz
Refrigerant	R32

Related product manuals

Preview: Daikin FBA35A2VEB

Daikin FBA35A2VEB

Preview: Daikin FBA-A

Daikin FBA60BVMA

Daikin FBA85BVMA

Daikin FBA71BVMA

Daikin FBA60BAVMA

Daikin FBA140BVMA

Daikin FBA125BVMA

Daikin FBA50BAVMA

Daikin FBA71A2VEB9

Daikin FBA125A2VEB

Daikin FBA60A2VEB9