Daikin FBQ50D2VEB - Page 93

ESIE15-13B Field Setting from Remote Controller
Field Setting 79
Graph 2 Target evaporating temperature control when "low humidity application" is selected. Field
setting 16(26)-2-03:
Te target
(˚C)
Te target acceptable area
Remote controller setting temp.
Te target limited ≤ 20˚C
(to protect the comp.)
Te (see note) target acceptable area
 Indoor temp. > setting → Te target down
 Indoor temp. < setting → Te target up
Te target limited ≥ 0˚C
Freeze protection
(40 min. integrated coil temp. ≤ -1˚C)
Indoor Temp
(˚C DB)